General : 727.342.5601   Toll Free : 1.888.792.0692  

How to Find Quality Motorcycle Parts

By none none June 18, 2014 No comments

motorcycle parts storesAs of 2012, there were an estimated nine million motorcycles registered in the United States. And yet, in spite of that popularity, motorcycles have a terrible reputation when it comes to safety: motorcyclists are 35 times more likely to be in a deadly accident on the road than the driver of a passenger vehicle. For this reason, it is vital that bikers follow motorcycle riding safety tips, and also ensure that their motorcycle parts and accessories are in perfect working order.


In the United States, only a small percentage of bikers report using their motorcycles as a form of transportation year round. More often than not, motorcycles are a seasonal endeavor. Therefore, the first step that a motorcyclist should follow is to thoroughly check and test their bike before that first annual ride. Check your motorcycle over, paying special attention to the brakes: a 2013 Consumer Reports survey found that the most common issues motorcyclists had with their bikes were related to their brakes. 


Make an annual visit to one of your local and trusted motorcycle parts stores to pick up anything you may need to make repairs. Or, alternatively, consider researching aftermarket motorcycle parts, or parts that can be purchased online, usually for more affordable prices. However, if you buy motorcycle parts online, you should be prepared to wait to ride your bike until you receive your shipment and get the parts installed.


Once you have done your annual check, bought any necessary parts from motorcycle parts stores or online retailers, and installed them, you will be ready for your first ride. However, once you are on the road, remember to be cautious: according to the NHTSA, an estimated 49% of motorcycle crashed in the U.S. are the result of a bike coming into contact with another vehicle. Check your motorcycle for issues before each ride, and then avoid tailgating and other unsafe behaviors while on the road. Moreover, while only 28 states have partial helmet laws for motorcycle riders, make sure you and any passengers wear proper protective gear in case of a crash. By following these safety tips, you will be significantly safer on the road.

Options for Motorcycle Parts and Customization

By none none May 14, 2014 No comments

custom motorcycles partsWith over 9 million motorcycles registered in the U.S., aftermarket motorcycle parts and accessories have become a staple in the retail environment. While technology and design advances have really changed the landscape for motorcycle dealers, you can now customize pretty much everything to suit your needs. 


These days, finding more choices for buying your next bike or custom motorcycles parts can seem difficult with so many different options. It helps to have some insight from dealers and other experts.


Motorcycle websites are an excellent source for in-depth looks at new bikes and their features, and they provide a listing of current inventory. Curious as to what others think of your potential next motorcycle? You can put it to the experts.


There are a wide variety of new and used motorcycle dealers who can field questions about all sorts of motorcycle options and amenities as you search, including options for motorcycle leases or motorcycle customizations. You can usually find plenty of bike pros who will help you navigate the new models, used bikes and repair. Be sure to get referrals from your friends and colleagues. They can also help you narrow down your selection of custom motorcycles parts.


First, if you do not have a particular bike or customization in mind, then some time on the road may help you uncover all of the features that you are interested in and provide a solid riding perspective. You can look at some of the more common features, amenities and systems that make riding fun and luxurious again. In fact, you can see a lot of the new models coming directly from the companies or dealers, including after market accessories. As new models are released and designed, you can get various riding reviews from the different makers.


Before buying your next motorcycle, do not be afraid to put it to the experts for their opinions and anecdotes. It might just help you make the best buying decision. Motorcycle expertise and opinion is so prevalent with so much diversity for the enthusiast.

What are the Different Kinds of Custom Handlebars for Motorcycles?

By none none May 5, 2014 No comments

custom handlebars for motorcyclesOne of the greatest things about owning a motorcycle is that customizing motorcycles can be fairly easy and offer you a variety of options. From adding custom chrome motorcycle parts to changing the rims or exhaust, there is almost no limit to what you can add or replace on your bike.

One popular way in which motorcycle owners add a custom look to a bike is by using custom handlebars for motorcycles. Your handlebars do more than simply steer -- changing them can give a motorcycle a whole new look. Handlebars are also responsible for supporting part of your weight, and they also serve as a place to mount controls for the brake, throttle, clutch, horn, lights, and mirrors. The types of handlebars used also depend on the type of riding the owner will do -- for instance, for sport or travel. Therefore, it's important to know which kinds of custom handlebars for motorcycles will work with your bike, both in looks and function.
If you're looking to add custom handlebars for motorcycles to your bike, check out some of the more common types of handlebars below:

· For sportier bikes, you have a variety of options when it comes to handlebars. Motocross bars are popular for motocross, off-road bikes, and sport bikes. You can typically find these from Japanese manufacturers such as Honda, Kawasaki, Suzuki, and Yamaha. Clip-on handlebars are also a good option, as they allow the rider to add two separate, shorter handles to the fork tubes of the bike rather than installing one single handlebar.
· If you own a classic bike or chopper, ape hanger handlebars are a popular choice for many owners. Ape hangers have a higher position that makes the rider sit up in order to reach them. Most commercial heights for ape hangers go up to 24 inches. These are typically not recommended for longer rides, however, as reaching up to hold onto the handlebars can cause numbness in the hands and fingers without the implementation of cruise control or other devices on the bike. 
· Buckhorn handlebars are similar to ape hangers, but shorter and more rounded at the top, so this may be a better alternative for those who like the look of ape hangers but would like something more manageable.
· Other types of handlebars depend on the rider's comfort or riding style. Adjustable handlebars are like clip-ons, and they can not only change the height of the rider's reach, but they can also allow hand angle adjustment for extra comfort. Beach bars and cruiser bars slope toward the back of the bike and allow the rider to sit up straight. Clubman bars are angled forward to allow for a more aggressive riding style, letting the rider lean toward the bike's controls.

If you know what kinds of handlebars you'd like, be sure to contact a custom shop to find out if they can add handlebars for you, or buy motorcycle parts online to do it yourself. Make sure that the parts you get are right for your bike and will give you the riding experience and level of comfort that you desire.

Got a Boring Bike? Customize Your Motorcycle's Parts and Paint

By none none April 23, 2014 No comments

custom paint motorcyclesIf you own a motorcycle, whether it's a Harley or a Honda, you know how important it is to you. Even more than that, you know how much it matters to stand out, and that's why customizing your bike may be very appealing. Using custom parts for motorcycles and getting custom paint motorcycles is a great way to express yourself and have a one-of-a-kind ride. Want ideas on how to customize a motorcycle? Read on for tips below:

1. Custom parts for your motorcycle's performance: There are a variety of ways you can augment your bike, especially if you're looking to improve or enhance performance. Many motorcycle owners who want a unique bike will swap out the engine or exhaust for more power or for efficiency. When it comes to power, pay attention to the number of cylinders in your engine. Some parts can even help save on fuel costs for those long trips on the open road.

2. Custom parts for your motorcycle's looks: Custom rims and custom handlebars for motorcycles are popular choices when it comes to changing the look. Ape hanger handlebars are great for giving a chopper a retro feel, and those who participate in motocross or off-roading will choose a sportier handlebar. Rims can vary in price but can add new colors or designs easily to any motorcycle.

3. Custom paint motorcycles for a unique appearance: Whether you just want to change the color, or if you want a one of a kind graphic, custom paint for motorcycles is a great way to change the look of a bike. Popular designs include flames, geometric graphics, skulls, and airbrushed designs, but the possibilities are truly endless. Most artists who design custom paint motorcycles will add any details you want.

With all the different ways to customize a motorcycle, it's no wonder so many people love owning them. If you have questions about customizing your motorcycle or if you would like a quote for parts or paint, be sure to see a dealer or custom shop today.

How Customizing Motorcycles Can Go From Hobby to Career

By none none April 11, 2014 No comments

customizing motorcyclesBeing able to customize motorcycles is not only a great hobby -- it can also be a career. Although customizing motorcycles can bring you great joy as you work hard building and improving your bike, the knowledge and experience you get from knowing how to customize a motorcycle is one of the most valuable skills you can have in the world of motorcycles. Whether you're interested in buying motorcycle parts to add to an existing bike, working with custom motorcycle kits, or handling the creative aspects of motorcycle design, customizing motorcycles can go from a fun pastime to a lucrative career.

Not sure which skills you need in order to work in customizing motorcycles? Here are some great ways that you can enhance your existing skills or cash in on the ones you have:

1. Know how to build a motorcycle. Whether you prefer working piece by piece or starting from a motorcycle kit, you should be able to put custom bikes together if you want to sell them. Being familiar with a wide variety of makes and models will ensure that you can please a variety of buyers by offering the parts and customization they're looking for.

2. Sharpen your painting skills. Building is one thing, but the art of custom paint for motorcycles is a great way to enhance the appearance of a bike -- custom made motorcycles or otherwise. Offering painting services will not only allow you to make your customers' bikes unique, but it will also help you corner the market on restoring older motorcycles as well.

3. Have knowledge of the classics, too. There's a big market for vintage or historic bikes, and many owners like having them restored. By being able to work with classic models, you can ensure that collectors, hobbyists, and hardcore fans of motorcycles will all want your expertise and skill in making their old bikes look like new again.

If you do decide to open a custom motorcycle shop, be sure to complete the appropriate paperwork and comply with any state and federal regulations pertaining to garages and repair shops. Also, make sure you're working with the best motorcycle parts distributors you can find. Customizing motorcycles is a great way to keep up with trends in motorcycles and help others feel the same joy you feel in having a priceless customized bike.

Three Easy Ways to Customize Your Motorcycle

By none none April 10, 2014 No comments

motorcycle customizationThat new bike you just bought rides beautifully, but you still feel like something's missing. Perhaps when you take it in for a tune up, you notice all of the new motorcycle parts and accessories for sale. You decide to get a few to put on your ride, and that feeling of missing something goes away. You realize that customizing motorcycles was precisely what you needed.

Motorcycle customization is a bug that's easy to catch--it's that itch to make something you love even better. It's building custom made motorcycles out of stock bikes, to create something that's truly unique and yours, reflecting your sense of personality and making your ride even better.

However, motorcycle customization can be difficult when you first start out. A lot of projects require time, dedication, and expertise. Thankfully, there are some easier, faster upgrades that anyone can do in their downtime. Here are a few beginner motorcycle customization projects for you to get started with.

A New Paint Job. 
No other project can individualize your bike's exterior the way repainting your bike can. In addition to the actual paint and space to do it, you'll also need a spray gun. First, you'll want to wipe off and then sand down the parts of the bike you want to redo. Then, spray on the filler coat, which gives it a fuller volume. Clean the spray gun out of the filler paint by running water through it. When the filler paint's dried, lay the color coating on it, and let it dry.

Saddlebags. 
Even if you already have saddlebags, this motorcycle customization can enhance your bike's usefulness, since the original ones may not be able to carry everything that you want. What's great about this project is that it's not only fast and easy, but there are many styles to choose from. Whether you want hard plastic or studded leather, there's a huge number of saddlebags to choose from.

New Seats. 
The original equipment manufacturer's seats are usually pretty lacking in comfort, which can make long rides a real bear. Thankfully, there are many varieties of custom seats, with different kinds of upholstery, that can make rides much more comfortable. If you're looking for a motorcycle customization project to immediately improve your bike's ride, then definitely look into getting a new seat.

Once you catch the motorcycle customization bug, it's tough to get rid of. Adding new parts to improve your bike's look and feel will not only make your ride more enjoyable, but instill you with stronger pride of ownership. If you have any questions about motorcycle customization, feel free to ask in the comments.

Three Great Motorcycle Customization Projects to Try Out

By none none March 3, 2014 No comments

motorcycle customizationStock bikes are great and all. Yet, once you've signed the papers giving you ownership of the motorcycle, you can't help but think about all the motorcycle parts and accessories you're going to add and modify. After all, a stock bike could be anyone's, but customized motorcycles show off the skill, know-how, and personality of their owners.

Here are a few great motorcycle customization projects that can help you take your new, stock bike and make it something that's truly yours!

1. Windshields. 

Windshields will not only keep the bugs off your face while you ride, but they'll also help you stay warm and relaxed. Installing a new, better windshield is a prime motorcycle customization project that will immediately enhance the pleasure you'll experience from your ride. The important thing to keep in mind, though, is that when you're installing a new windshield, you've got to make sure that it's at the proper height and angle. To prevent an obstructed view or headlight glare at night, the windshield should be several inches below your eye level.

2. Wheels. 

Wheels are one of the top motorcycle customization projects that riders undertake, since they'll make the bike look better and ride better. While most would think that the wider the better, the fact of the matter is that wider wheels will add more weight and could negatively affect how the bike turns and rides. Going wider is still a good idea, just be sure not to go too far. There are also several different varieties of wheels available, but if you're looking for the strongest set, you've got to go with forged wheels.

3. Chrome. 

The most common motorcycle aftermarket parts are chrome additions to the bike. Chrome has an amazing aesthetic appeal, and just about any part of the bike can be chromed out -- everything from the wheels, to the handlebars, to the tail lights.

Motorcycle customization is a great hobby to pursue -- no doubt about it. These are only a few great motorcycle customization projects that you can dive into, but there are plenty more. If you have the imagination for it, then you can build it. If you have any questions about motorcycle customization, feel free to ask in the comments.

Everything You Need to Know to Stay Safe on a Motorcycle

By none none February 24, 2014 No comments

custom parts for motorcyclesAcross the United States, sales of motorcycles have continued to increase over the past decade, according to the National Bureau of Transportation. Numbers from 2012 put the total number of motorcycles on the road in the U.S. at nine million. It's clear: Americans want more freedom, and what better way to get it than to hit the open road on a brand new chopper?

Unfortunately, a lot of riders don't understand that this freedom comes at a high price. Roughly 35% of all fatal motorcycle crashes are the result of excessive speed, and 22% involve victims who were operating their vehicle without a proper license.

Of course, not every rider is irresponsible. Most are law-abiding folks who don't travel too quickly and who have obtained the proper certifications in order to drive their custom made motorcycles. But accidents can happen to anyone at any time.

According to the National Highway Traffic Safety Administration, the top 10 reasons why motorbike riders get into crashes are:

  1. Bad weather conditions
  2. Other cars not using turn signals
  3. Splitting between two lanes
  4. Not paying attention to traffic lights
  5. Traveling at excessive speeds
  6. Poor roads
  7. Other cars not seeing them because of glare
  8. Road rage
  9. General inexperience on the bike
  10. Driving under the influence

Now, not all of those factors are preventable, especially the ones where the actual motorcycle riders aren't at fault. But as we mentioned above, accidents simply happen, so what are you going to do to protect yourself?
Plenty of riders like to rig their bikes with custom parts for motorcycles in order to achieve greater speeds or higher general performance. Generally, they'll purchase a cycle, then buy aftermarket motorcycle parts from a third party and do all the maintenance work themselves. There's nothing particularly wrong with driving a motorcycle that's been customized through aftermarket parts, but there are a few things you should know in order to stay safe when you hit the road on one.

Choosing the Right Bike
Learning how to customize a motorcycle isn't particularly hard, but it does take a lot of open-road experience to understand how the machine works the way it does. If you're just starting out, you should look into a used bike to learn on instead of dropping money on custom parts for motorcycles.

Swallowing Your Pride
OK, here it comes. While not every state has mandated a helmet law, you'd really be a crazy person if you didn't wear one. Solid helmets cut the chance of you dying in a crash down by 37% and the risk of sustaining brain damage down by 67%. Like we keep saying, accidents will happen. What are you going to do to stay safe?

Dressing the Part
You could be the most skillful stunt cycle rider in the world, but if you're on board with only a T-shirt and a pair of jeans, you're actually playing it very, very dumb. Here's what every driver needs before they hit the road:

  • Crash helmet: For obvious reasons.
  • Waterproof jacket: To keep you warm and dry.
  • Leather pants: To protect you from the wind.
  • Boots: For more control.
  • Gloves: In case you fly off.
     

Well, that seems to cover everything. From custom parts for motorcycles to a simple piece of heavy-duty plastic on your head that just might save your life, it's always important to know what you're working with when it comes to riding a motorcycle.

Why Should You Buy Aftermarket Motorcycle Parts?

By none none February 18, 2014 No comments

aftermarket motorcycle partsCustomizing motorcycles is an excellent, practical hobby to have. Not only do you get to work with your hands while stimulating the mind, you also get an awesome ride when you're done. Who wouldn't enjoy building custom made motorcycles?

Of course, custom parts for motorcycles can get pretty expensive. When it comes to your ride, you don't want to skimp on the price either, so you may feel stuck between a rock and a hard place. Thankfully, there are quality aftermarket motorcycle parts that are quite affordable.

Aftermarket motorcycle parts are parts produced by a company other than the original manufacturer. These businesses will reverse engineer the original parts after they've hit the market, and then reproduce them. They're great not only because their cost is often lower, but also because the manufacturers had the time to take out any of the initial defects, weaknesses, and problems that the original manufacturer had. 

Of course, some aftermarket motorcycle parts may actually be of lower quality than the original parts, so when you're shopping, make sure to read reviews first so that you know precisely what you're getting. Additionally, you can also look at what materials were used to construct them. If they're made out of carbon fiber, titanium, or aerospace aluminum, chances are they're the high performance aftermarket motorcycle parts that you really want.

Your aftermarket motorcycle parts should make your ride faster and better, increase its resale value, increase its use, and add to its aesthetics without compromising the bike's functionality. So long as they're made out of high quality material, and the reviews are positive, then there's no reason not to opt for aftermarket parts. 

Aftermarket parts are a great way to fund your customizations. If you have any questions, feel free to ask in the comments.

Four Important Things New Motorcycle Owners Should Remember

By none none January 27, 2014 No comments

Four Important Things New Motorcycle Owners Should RememberThe Bureau of Transportation reports that motorcycle sales have been steadily rising for the past decade. If you're out on the highway in the middle of winter, though, you probably wouldn't be able to tell. That's because motorcycle riding is very dependent on the weather, not to mention that bikes tend to be expensive toys that owners like to keep in tip-top shape. Riding a motorcycle can be one of the most exhilarating experiences a person can have, but it's certainly not an undertaking that benefits from impulsive decisions.

Before you buy any machine, ask yourself: Why do I want this? Am I going to devote the proper time to get to know its details before I ever take it on the road? How much is customization going to cost, even including new custom helmets for motorcycles? It might help to have a checklist handy as you begin to sort through the specifics of the process:

Buy a bike you can actually ride.

One of the biggest mistakes first-time riders tend to make is investing in a piece of machinery they have no idea how to use. Think about it logically -- when you learn how to ride a bicycle, you start with training wheels, so why drop thousands on some brand new custom made motorcycles if you still have yet to master the art of riding? Pick up a cheap or used bike to learn the basics, then slowly work your way up the ladder of prestige. It only makes sense economically.

Protect your head.

This is probably the bit of advice that motorcyclists hear all the time and they're probably sick of it. Yes, only 19 states currently require strapping on a helmet before you hit the road. But the facts are staggering: A rider is 40% more likely to experience brain trauma if he or she crashes without wearing a helmet. You can check your arguments about what's "cool" at the door -- the hospital door, to be exact. Besides, you should see all the cool custom helmets for motorcycles currently on the market. You're bound to find one that captures your outsider image perfectly, so show it off instead of not wearing one at all.

Dress for success.

Part of hopping on a bike is being able to feel the air of the open road on your skin. But riding in shorts and a T-shirt, while it might seem like you're getting the most freedom you possibly can, is actually a recipe for regrettable riding. Prepare for the elements, even on a beautiful sunny day. It's no accident that cyclists throughout the world choose leather as their riding apparel of choice: it's reinforced, padded and provides more protection in case of sliding or other accidental injuries. That's one of the most important motorcycle riding safety tips to understand.

Know your bike inside and out.

If your interests lie in customizing motorcycles, you better know exactly which motorcycle parts to buy. Also, it's always easier to take things apart than to put them back together, and that goes double for motorcycle parts and accessories. Learn how to ride first; learn how to trick out your bike second. Always do plenty of research before you invest in parts, especially if they're shipping internationally. Whether it's custom helmets for motorcycles or simply a new exhaust or brake system, you can't go blindly into a new improvement.