General : 727.342.5601   Toll Free : 1.888.792.0692  

February 2014

Everything You Need to Know to Stay Safe on a Motorcycle

By none none February 24, 2014 No comments

custom parts for motorcyclesAcross the United States, sales of motorcycles have continued to increase over the past decade, according to the National Bureau of Transportation. Numbers from 2012 put the total number of motorcycles on the road in the U.S. at nine million. It's clear: Americans want more freedom, and what better way to get it than to hit the open road on a brand new chopper?

Unfortunately, a lot of riders don't understand that this freedom comes at a high price. Roughly 35% of all fatal motorcycle crashes are the result of excessive speed, and 22% involve victims who were operating their vehicle without a proper license.

Of course, not every rider is irresponsible. Most are law-abiding folks who don't travel too quickly and who have obtained the proper certifications in order to drive their custom made motorcycles. But accidents can happen to anyone at any time.

According to the National Highway Traffic Safety Administration, the top 10 reasons why motorbike riders get into crashes are:

  1. Bad weather conditions
  2. Other cars not using turn signals
  3. Splitting between two lanes
  4. Not paying attention to traffic lights
  5. Traveling at excessive speeds
  6. Poor roads
  7. Other cars not seeing them because of glare
  8. Road rage
  9. General inexperience on the bike
  10. Driving under the influence

Now, not all of those factors are preventable, especially the ones where the actual motorcycle riders aren't at fault. But as we mentioned above, accidents simply happen, so what are you going to do to protect yourself?
Plenty of riders like to rig their bikes with custom parts for motorcycles in order to achieve greater speeds or higher general performance. Generally, they'll purchase a cycle, then buy aftermarket motorcycle parts from a third party and do all the maintenance work themselves. There's nothing particularly wrong with driving a motorcycle that's been customized through aftermarket parts, but there are a few things you should know in order to stay safe when you hit the road on one.

Choosing the Right Bike
Learning how to customize a motorcycle isn't particularly hard, but it does take a lot of open-road experience to understand how the machine works the way it does. If you're just starting out, you should look into a used bike to learn on instead of dropping money on custom parts for motorcycles.

Swallowing Your Pride
OK, here it comes. While not every state has mandated a helmet law, you'd really be a crazy person if you didn't wear one. Solid helmets cut the chance of you dying in a crash down by 37% and the risk of sustaining brain damage down by 67%. Like we keep saying, accidents will happen. What are you going to do to stay safe?

Dressing the Part
You could be the most skillful stunt cycle rider in the world, but if you're on board with only a T-shirt and a pair of jeans, you're actually playing it very, very dumb. Here's what every driver needs before they hit the road:

  • Crash helmet: For obvious reasons.
  • Waterproof jacket: To keep you warm and dry.
  • Leather pants: To protect you from the wind.
  • Boots: For more control.
  • Gloves: In case you fly off.

Well, that seems to cover everything. From custom parts for motorcycles to a simple piece of heavy-duty plastic on your head that just might save your life, it's always important to know what you're working with when it comes to riding a motorcycle.

Why Should You Buy Aftermarket Motorcycle Parts?

By none none February 18, 2014 No comments

aftermarket motorcycle partsCustomizing motorcycles is an excellent, practical hobby to have. Not only do you get to work with your hands while stimulating the mind, you also get an awesome ride when you're done. Who wouldn't enjoy building custom made motorcycles?

Of course, custom parts for motorcycles can get pretty expensive. When it comes to your ride, you don't want to skimp on the price either, so you may feel stuck between a rock and a hard place. Thankfully, there are quality aftermarket motorcycle parts that are quite affordable.

Aftermarket motorcycle parts are parts produced by a company other than the original manufacturer. These businesses will reverse engineer the original parts after they've hit the market, and then reproduce them. They're great not only because their cost is often lower, but also because the manufacturers had the time to take out any of the initial defects, weaknesses, and problems that the original manufacturer had. 

Of course, some aftermarket motorcycle parts may actually be of lower quality than the original parts, so when you're shopping, make sure to read reviews first so that you know precisely what you're getting. Additionally, you can also look at what materials were used to construct them. If they're made out of carbon fiber, titanium, or aerospace aluminum, chances are they're the high performance aftermarket motorcycle parts that you really want.

Your aftermarket motorcycle parts should make your ride faster and better, increase its resale value, increase its use, and add to its aesthetics without compromising the bike's functionality. So long as they're made out of high quality material, and the reviews are positive, then there's no reason not to opt for aftermarket parts. 

Aftermarket parts are a great way to fund your customizations. If you have any questions, feel free to ask in the comments.