Ariel Arrow/Leader True Fire Ign 12v

For use with 12 volt converted electrical systems.  Will not work on standard 6 volt systems.

Timing worries?
Tired of constantly adjusting two sets of points, and never being able to get the engine to run just right?
These problems are a thing of the past with the TRUE-FIRE electronic trigger design.
The system features the wasted spark principle, meaning both plugs fire at the same time.
With the TRUE-FIRE ignition you set the timing on one cylinder and it will be right on the other.

Ignition timing made easy
Using the on-board static timing light, timing is very easy. Lock the engine (on either cylinder) in the standard way and rotate the trigger unit on its adjustment slots, with the aid of the timing light.
The timing procedure is explained using step-by-step color pictures in the installation booklet.
The precision engineered steel rotor gives accurate 180° firing.
Easy starting
The TRUE-FIRE trigger unit features a zero speed hall-effect sensor. In effect this means that the ignition system will produce consistent, strong sparks at very low cranking speeds, leading to better than ever starting.

Have you ever fitted an ignition system where the wires don't reach?
TRUE-FIRE has extra long wires from the ignition module - 1 meter long, allows the unit to be fitted almost anywhere.
TRUE-FIRE does not have the connection problems associated with other systems, the wires run directly from the module to the pickup. All you need is a small screwdriver to make these connections.

Are you worried that the ignition will be bulky and difficult to hide?
The TRUE-FIRE ignition module is compact (80mm x 40mm x 20mm) and light.
Its size & shape makes it easy to fit and hide out of sight

New to electronic ignitions?
Every TRUE-FIRE system includes a comprehensive full color installation booklet to guide you through, with easy-to-read, detailed instructions, photos, wiring diagrams and timing instructions.
System contents: high-power ignition module, trigger unit, steel timing rotor, two 3 volt ignition coils, coil clamps, coil link wire, earthing wire, quality crimp connectors & insulators, module fixing, small & large tie-straps and comprehensive full color installation booklet.