- Description
-
Details
This is for the UFO disc kit only. The slide is not included. A slide with a 3.5 cutaway is required for proper use. Please see our milled & drilled, UFO ready slides for ease of installation.
The UFO by Thunder Products is a simple, trouble free, aerodynamic piece that fits VM Mikuni carburetors. The UFO makes a normal round slide carburetor out-perform the more expensive flat slide carburetor by eliminating turbulence and increasing air flow and velocity, creating a highly atomized fuel charge. Normal gains are 3/4 to 1 HP per 100 cc of engine displacement on 4 stroke engines and 1 1/2 to 2 HP per 100cc of engine displacement on 2 stroke engines. (Re-jetting and tuning may be required).
- More horsepower with less fuel
- Broader power band
- Explosive throttle response
- Superior fuel atomization
- Less sensitive to temperature, altitude and jetting changes
- Cleaner emissions
- Cooler running engine
- Easier starting and warm-ups
- Reduces cold pipe syndrome
- Works with stock or modified engines
Without the U.F.O., the air hits the forward wall of the slide cavity creating a rolling air turbulence which forces the poorly atomized fuel droplets to the lower portion of the carb bore resulting in poor fuel atomization and poor performance.
With the aerodynamic U.F.O. filling the slide cavity, the rolling air turbulence is eliminated. The higher velocity air flow pulls the fuel further up the needle and higher in the carburetor bore resulting in superior fuel atomization. This means more HP, quicker throttle response, improved fuel economy and a cooler running engine.
NOTE: When installing UFOs, the pilot jet must be reduced substantially (usually about 50%, sometimes even more). Most installations end up with a #17.5 or #20 pilot jet.
Additional Information
Specification Details SKU 3234-1 Brand Thunder Products Fitment Information
Mikuni Models
- Mikuni VM30 Round Slide - Flange Mount
- Mikuni VM30-164 Round Slide
- Mikuni VM30-83 Round Slide
- Mikuni VM32 Round Slide - Flange Mount
- Mikuni VM32-193 Round Slide
- Mikuni VM32-282 Round Slide
- Mikuni VM32-33 Round Slide
- Mikuni VM34 Round Slide - Flange Mount
- Mikuni VM34-168 Round Slide
- Mikuni VM34-275 Round Slide
- Mikuni VM34-389 Round Slide
Questions & Answers
-
Hello!
Are these UFO`s With 3,5 cutout?
B.regards
Jorn StorholtThis is the UFO only. You will need to use a slide with a 3.5 cutaway along with this product. Soon we will be offering genuine Mikuni slides that we have been milled, and drilled for use with the UFOs.
Answer by: Web Support (Admin) on Nov 12, 2015 3:07:00 PM
- Reviews
-
Write Your Own Review
- Fitment Information
-
Fitment Information
Mikuni Models
- Mikuni VM30 Round Slide - Flange Mount
- Mikuni VM30-164 Round Slide
- Mikuni VM30-83 Round Slide
- Mikuni VM32 Round Slide - Flange Mount
- Mikuni VM32-193 Round Slide
- Mikuni VM32-282 Round Slide
- Mikuni VM32-33 Round Slide
- Mikuni VM34 Round Slide - Flange Mount
- Mikuni VM34-168 Round Slide
- Mikuni VM34-275 Round Slide
- Mikuni VM34-389 Round Slide
- Product Question
- Shipping Estimation
-
You can use this section to calculate shipping costs on all available methods for the item on this page, or your entire shopping cart.
-
-
-
-
Yes No
-