Excellent
By Phil on 10/28/2016
Excellent product. Came exactly as descried and amazing quality! 10/10
Price | |
---|---|
Value | |
Quality |
Pre-Jetted carburetors only. If you are in need of a full kit, please contact us or check the carburetor kits portion of the site.
Jetting Specifications | ||||||||
Carburetor # | Venturi Size | Main jet (VM4/042) | Pilot Jet (VM22/210) | Needle Jet | Jet Needle | Throttle Valve | Air Jet | Needle Valve |
VM34-275 | 34 | 230 | 40 | P-2 | 6DH3 | 2.0 | 2.0 | 3.3 |
Pre-jettted carburetors for the BMW R100. Intended for stock, or mildly modified engines. Includes left and right carbs.
Mikuni's VM Series, round slide carburetors have proven themselves as the performance standard for use on single and multi-cylinder, motorcycle and ATV vehicles. They're perfect carbs for street riding, motocross, enduro and trail riding, as well as flat track and road racing. These carbs are designed to work on both 2-stroke and 4-stroke engines.
VM series carburetors offer a large selection of bore sizes for optimal fuel mixture and flow to match most engine modifications. A wide range of tuning components are available to allow precise fuel mixture metering in almost any application, at any throttle setting and under any riding condition.
Specification | Details |
---|---|
UPC | 810000480869 |
SKU | VM34-R100 |
Brand | Genuine Mikuni |
Country of Manufacture | Japan |
Carburetor Application | Model Specific |
Carburetor Size | 34mm |
Carburetor Type | Round Slide |
Carburetor Mount | Spigot |
Carburetor Intake Bell Diameter | 58mm |
Engine Side Sizing | 40mm |
Accelerator Pump | No |
Carburetor Depth | 93mm |
Carburetor Height | 137mm |
Carburetor Width | 83mm |
Fuel Inlet Size | 5/16" |
Main Jet Series | VM4/042 |
Pilot Jet Series | VM22/210 |
Needle Jet Series | 159 |
Needle Series | #6 |
Needle & Seat Type | VM34/39 |
Starter Jet Series | VM17/1002 |
Air Jet Series | BS30/97 |
By Phil on 10/28/2016
Excellent product. Came exactly as descried and amazing quality! 10/10
Price | |
---|---|
Value | |
Quality |
At this time we do not offer throttle cables for this kit, but we hope to source some over the next couple of months. Most of our customers have a local shop make their cables or have them made by Motion Pro. What you would need is a cable that is the same length as the BMW throttle cable, but with small fittings on both ends of the cable. BMW /5 and R90, R100 stock cables typically have small rectangle fittings on the throttle ends and larger barrel fittings on the carb side. While the stock BMW ends are squared, we've found the small rounded ends (typically seen on the throttle ends of Mikuni-style throttle cables) will work fine. But you need that small rounded end on both sides of the cable.
By Phil on 10/28/2016
Excellent product. Came exactly as descried and amazing quality! 10/10
Price | |
---|---|
Value | |
Quality |