Great Carb.
By patman on 7/16/2016
Great carb. Fits and runs great. Jetting was close to spot on. Just as you would expect from mikuni great build quality.
Price | |
---|---|
Value | |
Quality |
RS Series Carburetor Rack - 34mm
This rack has a 77mm-93mm-77mm spacing from center to center to center of the carburetor spigots. This needs to match that of your engine ports.
The Mikuni RS series carburetors were designed and built in response to the needs of the worlds top motorcycle road race and drag race teams. They required carburetors which could satisfy the precise fuel metering demands and high flow volume required by highly modified race engines. And yet, also provide the smooth controllable throttle response that is needed by any rider pushing his motorcycle to its limits on the race track and under any high performance applications. The carburetors need to meter fuel correctly under a wide range of atmospheric conditions and engine tuning modifications while being easily accessible for trackside tuning changes which need to be made quickly.
Designed for in-line four cylinder performance motorcycle applications, the Mikuni RS series radial flat slide carburetorss offer superior horsepower gains with their maximum flowing smoothbore induction tract and radial flat slide design. And adjustable accelerator pump system helps to provide instant throttle response, particularly in the lower RPM range. The RS series carburetors feature a compact design which is 25% lighter than other performance cabs and uses readily available Mikuni jets.
Features:
Starter System: Provides fuel enrichment for cold engine starting
Adjustable accelerator Pump: Adjustable accelerator pumps system helps to provide instant throttle response, especially in the lower RPM range
Accelerator Pump Adjust Screws: Sets on and off operation of accelerator pump in relation to throttle slide position.
Idle Adjust Screw: Controls engine idle speed
Throttle Return Spring: A choice of positioning pegs allows adjustment of spring tension
Pilot Air Jet: Use in conjunction with the pilot fuel screw for tuning of mixture at idle to 1/4 throttle
Smooth Throttle Bore: Produces the optimum air and fuel mixture flow at all RPMs
Accelerator Pump: Shoots fuel directly into the intake tract for immediate engine response
Flat Throttle Valve: Provides the strongest signal for precise and instantaneous throttle response
Typical, but not all of the Applications: GSX-600 1988, GSX-R750 up to 1990, GS750 ALL YEARS, and the Kawasaki KZ750
Specification | Details |
---|---|
SKU | RS34-D21-K |
Brand | Genuine Mikuni |
Country of Manufacture | Japan |
Carburetor Size | 34mm |
Carburetor Type | Flat Slide |
Carburetor Mount | Spigot |
Carburetor Intake Bell Diameter | 55mm |
Engine Side Sizing | 40mm |
Idle Location | Top |
Accelerator Pump | Yes |
Fuel Inlet Size | 5/16" |
Main Jet Series | N100.604 |
Pilot Jet Series | VM28/486 |
Needle Jet Series | 568 |
Needle Series | #9 |
Needle & Seat Type | N149.040 |
Starter Jet Series | VM17/1002 |
Air Jet Series | BS30/97 |
Pump Nozzle Series | TM36/43 |
Carburetor Spacing | 77-93-77 Bore To Bore |
By patman on 7/16/2016
Great carb. Fits and runs great. Jetting was close to spot on. Just as you would expect from mikuni great build quality.
Price | |
---|---|
Value | |
Quality |
We do not have that information. To get a good idea, you should measure your carburetors from center to center of the next one over. A-B-C-D. These racks are setup with a center to center spacing of 77mm from A to B, 93mm from B to C, and 77mm from C to D. You should also measure the ID of the carburetor holders, or the OD of the carburetor spigot, to ensure your holder will fit these carbs. The RS34 rack has carburetor with an OD of 40mm
By patman on 7/16/2016
Great carb. Fits and runs great. Jetting was close to spot on. Just as you would expect from mikuni great build quality.
Price | |
---|---|
Value | |
Quality |