- Description
-
Details
New Page 1
Standard Jetting Specifications Carburetor # Venturi Size Main jet (VM4/042) Pilot Jet (VM22/210) Needle Jet Jet Needle Throttle Valve Air Jet Needle Valve VM34-275 34 260 35 Q-2 6DH04 2.5 2.0 3.3 Mikuni's VM Series, round slide carburetors have proven themselves as the performance standard for use on single and multi-cylinder, motorcycle and ATV vehicles. They're perfect carbs for street riding, motocross, enduro and trail riding, as well as flat track and road racing. These carbs are designed to work on both 2-stroke and 4-stroke engines.
VM series carburetors offer a large selection of bore sizes for optimal fuel mixture and flow to match most engine modifications. A wide range of tuning components are available to allow precise fuel mixture metering in almost any application, at any throttle setting and under any riding condition.
Additional Information
Specification Details SKU VM34-275 Brand Genuine Mikuni Country of Manufacture Japan Carburetor Application General Carburetor Size 34mm Carburetor Type Round Slide Carburetor Mount Spigot Carburetor Intake Bell Diameter 58mm Engine Side Sizing 40mm Idle Location Right Accelerator Pump No Carburetor Depth 93mm Carburetor Height 137mm Carburetor Width 83mm Fuel Inlet Size 5/16" Slide Type VM32/65 Main Jet Series VM4/042 Pilot Jet Series VM22/210 Needle Jet Series 159 Needle Series #6 Needle & Seat Type VM34/39 Starter Jet Series VM17/1002 Air Jet Series BS30/97 Float Height 22mm-24mm Questions & Answers
-
would the vm34 275 be a good choice for my 1974 XL350 Honda.
BradThat will depend on what you are using the bike for, and how its setup. If its stock, I would suggest something smaller, like a VM30 for good low and mid range power. If you are setting it up for dirt track racing, or some other use where you want a lot of top end power, a VM34 should fit the bill.
Answer by: Web Support (Admin) on Jul 1, 2021 9:57:00 AM -
Is this model "right" as you are sitting on the bike, and is the choke on the right outside of the carb?
ThanksYes, this is a right side idle adjust if sitting on the bike. The choke however is to the left. This is the only right handle idle configuration available for a VM32 or VM34. When it comes to Mikuni VM series carburetors, the only change for left vs. right carbs is the idle adjustment location. Everything else is static.
Answer by: Web Support (Admin) on Feb 14, 2022 11:05:00 AM -
Does this carb VM34 fit a 350 OSSA MAR or a Montesa 348?
Thank you.
We do not have any hands on experience with that model. Please view the dimensions provided on the product page to get any idea of fitment to the manifold, and air filter. Some jetting/tuning will very likely be needed.
Answer by: Web Support (Admin) on Nov 21, 2016 10:22:00 AM
-
- Reviews
-
Write Your Own Review
- Fitment Information
-
- Product Question
- Shipping Estimation
-
You can use this section to calculate shipping costs on all available methods for the item on this page, or your entire shopping cart.
-
-
-
-
Yes No
-