- Description
-
Details
Pre-jettted carburetor for the Yamaha SR/XT/TT 500 singles. Intended for peformance modified engines. This is the carburetor only. You may need a throttle cable, an d possibly an air filter depending on your setup. This will slide into the factory carb holder, but it is a tight fit. If your stock carb holder is dried out and stiff, see our related products section for a new one.
Jetting Specifications Carburetor # Venturi Size Main jet (VM4/042) Pilot Jet (VM22/210) Needle Jet Jet Needle Throttle Valve Air Jet Needle Valve VM38-9 38 260 30 P-6 6F8 3.0 0.5 3.3 Pre-jettted carburetor for the Yamaha SR/XT/TT 500 singles. Intended for modified engines.
Mikuni's VM Series, round slide carburetors have proven themselves as the performance standard for use on single and multi-cylinder, motorcycle and ATV vehicles. They're perfect carbs for street riding, motocross, enduro and trail riding, as well as flat track and road racing. These carbs are designed to work on both 2-stroke and 4-stroke engines.
VM series carburetors offer a large selection of bore sizes for optimal fuel mixture and flow to match most engine modifications. A wide range of tuning components are available to allow precise fuel mixture metering in almost any application, at any throttle setting and under any riding condition.
Additional Information
Specification Details UPC 810000480746 SKU VM38-9-YAM500 Brand Genuine Mikuni Country of Manufacture Japan Carburetor Application Model Specific Carburetor Size 38mm Carburetor Type Round Slide Carburetor Mount Spigot Carburetor Intake Bell Diameter 62mm Engine Side Sizing 43mm Idle Location Right Accelerator Pump No Carburetor Depth 116mm Carburetor Height 154mm Carburetor Width 79mm Fuel Inlet Size 5/16" Slide Type VM38/24 Main Jet Series VM4/042 Pilot Jet Series VM22/210 Needle Jet Series 166 Needle Series #6 Needle & Seat Type VM34/39 Starter Jet Series VM17/1002 Air Jet Series BS30/97 Fitment Information
Yamaha Models
- Yamaha SR500 1978 - 1981
- Yamaha TT500 1976 - 1981
- Yamaha XT500 1976 - 1981
Questions & Answers
-
hi is this a genuine mikuni carb,thanks
Yes, it is a genuine Mikuni carburetor, and we use genuine Mikuni jetting to set it up for the Yamaha 500. No aftermarket parts are used.
Answer by: Web Support (Admin) on Apr 29, 2021 9:38:00 AM
- Reviews
-
Write Your Own Review
- Fitment Information
-
Fitment Information
Yamaha Models
- Yamaha SR500 1978 - 1981
- Yamaha TT500 1976 - 1981
- Yamaha XT500 1976 - 1981
- Product Question
- Shipping Estimation
-
You can use this section to calculate shipping costs on all available methods for the item on this page, or your entire shopping cart.
-
-
-
-
Yes No
-