SKU | Slide Cutaway | Material | Idle Adjust Location | Price | Qty | Add to Cart |
---|---|---|---|---|---|---|
VM32/65-1.5 | 1.5 | Brass | Right |
$24.95
|
Out of stock |
|
VM32/65-2.0 | 2.0 | Brass | Right |
$24.95
|
||
VM32/65-2.5 | 2.5 | Brass | Right |
$24.95
|
||
VM32/65-3.0 | 3.0 | Brass | Right |
$24.95
|
||
VM32/65-3.5 | 3.5 | Brass | Right |
$24.95
|
- Description
-
Details
Fits most right side idle, Mikuni VM32 and VM34 spigot mounted carburetors.
- Chrome plated brass
- 1.395" outside diameter
- Right Side Idle Screw
Additional Information
Specification Details Jet Type Throttle Slide Pin Groove Width 2.60mm Material Brass Slide Plating Chrome Brand Genuine Mikuni SKU VM32/65 Country of Manufacture Japan Fitment Information
Mikuni Models
- Mikuni VM32-193 Round Slide
- Mikuni VM34-275 Round Slide
Questions & Answers
-
Hey Team,
Welp, let me start by first saying I'm an idiot for having to replace this vm32/65-xx part. I have an old CB450 and I am excited to upgrade the stock Keihins to the coveted Mikuni Carbs. I had gotten the vm32's out of the box, and while making some adjustments before mounting, I accidently tipped the carb upside down while the cap was off the top.
You guessed it... the slide SLID right out, and hit the ground causing a very minor little ding. So minor that I don't see it being an issue, but I want to replace this sensitive part for piece of mind. My question is simple.
What is there difference between vm32/65-1.5(2.0,2.5,3.0,3.5)
Its a bit confusing.
Thanks!
-Paul Harding1.5 - 3.5 stands for the relative size of the cutaway on the slide. It is the height of the arch on the intake side of the carburetor. If you are trying to match the slide you have, you should be able to see a small etching on the bottom side of your slide being replaced. It is likely a 3.0 if you are using it on a CB350.
Answer by: Web Support (Admin) on Jan 18, 2016 5:53:00 PM -
Does "right side idle adjust" mean the right hand side of the atv if you're on the seat looking down? Also, will this slide work on a Mikuni VM34 SS carb?
Yes, when sitting on the bike/atv, if the idle adjust is on your right side, this is the correct orientation slide. Yes, this is correct for the VM34SS, so long as its a right side idle adjust.
Answer by: Web Support (Admin) on Aug 27, 2020 9:38:00 AM
- Reviews
-
Write Your Own Review
- Fitment Information
-
Fitment Information
Mikuni Models
- Mikuni VM32-193 Round Slide
- Mikuni VM34-275 Round Slide
- Product Question
-
Product Questions
Hey Team,
Welp, let me start by first saying I'm an idiot for having to replace this vm32/65-xx part. I have an old CB450 and I am excited to upgrade the stock Keihins to the coveted Mikuni Carbs. I had gotten the vm32's out of the box, and while making some adjustments before mounting, I accidently tipped the carb upside down while the cap was off the top.
You guessed it... the slide SLID right out, and hit the ground causing a very minor little ding. So minor that I don't see it being an issue, but I want to replace this sensitive part for piece of mind. My question is simple.
What is there difference between vm32/65-1.5(2.0,2.5,3.0,3.5)
Its a bit confusing.
Thanks!
-Paul Harding - Shipping Estimation
-
You can use this section to calculate shipping costs on all available methods for the item on this page, or your entire shopping cart.
-
-
-
-
Yes No
-