- Description
-
Details
Standard Jetting Specifications Carburetor # Venturi Size Main jet (VM4/042) Pilot Jet (VM22/210) Needle Jet Jet Needle Throttle Valve Air Jet TM38-27 38 370 20 N/A 6EJ12-55 3.5 None Typically used on high performance 250cc Two Stroke engines.
TM Series Carburetors provide significant performance improvements over older design round slide carburetors. Air flows faster and smoother through the TM Series venturi due to the flat slide configuration and the jet blocks which help create a smoothbore effect. The high velocity of the air flow means a stronger vacuum at the needle jet, providing more precise metering and better throttle response.
Additional Information
Specification Details SKU TM38-27 Brand Genuine Mikuni Country of Manufacture Japan Carburetor Application General Carburetor Size 38mm Carburetor Type Flat Slide Carburetor Mount Spigot Carburetor Intake Bell Diameter 62mm Engine Side Sizing 44mm Idle Location Left Accelerator Pump No Carburetor Depth 76mm Carburetor Height 164mm Carburetor Width 76mm Slide Type 999-832-014 Main Jet Series VM4/042 Pilot Jet Series VM22/210 Needle Jet Series 389 Needle Series #6 Needle & Seat Type 786-36004 Starter Jet Series VM17/1002 Air Jet Series BS30/97 Questions & Answers
-
What is the needle jet ID for the TMX38 or what is its measured inner diameter (using a digital caliper)?
The TMX has a fixed needle jet which cannot be removed without damaging the carburetor. So getting an accurate measurement is difficult.
Measuring the base of the needle jet where the main jet screws in, the ID is just under 5mm (approximately 4.75mm) which is also the OD of threads on the main jet.Answer by: rick c (Admin) on Oct 1, 2019 9:21:00 AM
-
- Reviews
-
Write Your Own Review
- Fitment Information
-
- Product Question
- Shipping Estimation
-
You can use this section to calculate shipping costs on all available methods for the item on this page, or your entire shopping cart.
-
-
-
-
Yes No
-